Special Metal Products

We are a professionally managed organization having extensive experience in the field of all Ferrous & Non-Ferrous metals. Having more than two decades of experience and expertise, We have excellent sourcing network in India and across the world to supply all stainless steel, Carbon steel, Nickel Alloy & Special alloys in the shape of Pipes, Tubes, Sheets, Plates, Rods, Pipe Fittings, Flanges etc. 

We offer an extensive array of Cobalt Alloys that are manufactured using high-grade raw material and latest machinery. Our range is available in cobalt rods, cobalt electrodes, cobalt wire and cobalt powder for variegated industrial applications. Furthermore, appreciated for its durability and high tensile strength, our range can be used for forming wire, rod and cobalt base alloys.

With thorough knowledge of the industry, we are engaged in importing, manufacturing and supplying Cobalt Alloys. Widely used in stationary and flying turbines, offered alloys contain nickel or cobalt as their main alloy constituent. These alloys are tested by our experts on several quality parameters and then forward for the final dispatch to the customers.

Hastelloy B2 is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids. Molybdenum is the primary alloying element which provides significant corrosion resistance to reducing environments. This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.

This nickel alloy provides excellent resistance to hydrochloric acid at all concentrations and temperatures. In additions, Hastelloy B2 has excellent resistance to pitting, stress corrosion cracking and to knife-line and heat-affected zone attack. Alloy B2 provides resistance to pure sulfuric acid and a number of non-oxidizing acids

Alloy B-2 has poor corrosion resistance to oxidizingenvironments, therefore, it is not recommended for use in oxidizing media or in the presence of ferric or cupric salts because they may cause rapid premature corrosion failure. These salts may develop when hydrochloric acid comes in contact with iron and copper. Therefore, if this alloy is used in conjunction with iron or copper piping in a system containing hydrochloric acid, the presence of these salts could cause the alloy to fail prematurely. In addition, this nickel steel alloy should not be used at temperatures between 1000 F and 1600 F because of a reduction in the ductility in the alloy.

Features :

• Great resistance to stress corrosion cracking and pitting
• Significant resistance to reducing conditions like hydrogen chloride, sulfuric, acetic and phosphoric acids
• Resistance to hydrochloric acid at all concentrations and temperatures

We offer a wide range of Inconel Pipes made of qualitative raw material procured from reliable vendors. Known for its high quality, durability and high utility these Inconel Pipes are widely used in various industries across the globe.

Standards
ASTM / ASME SB 163 / 167 / 517 / 704 / 705

Grades:

• ASTM / ASME UNS 6600 Inconel 600 Pipes
• ASTM / ASME UNS 6601 Inconel 601 Pipes
• ASTM / ASME UNS 6625 Inconel 625 Pipes
• ASTM / ASME UNS 7718 Inconel 718 Pipes
• ASTM / ASME UNS 7751 Inconel X-750 Pipes
• ASTM / ASME UNS 8800 Inconel 800 Pipes
• ASTM / ASME UNS 8810/11 Incoloy 800H Pipes
• ASTM / ASME UNS 8825 Incoloy 825 Pipes

Inconel Alloy Pipes Type:

• Seamless / ERW / Welded/ Fabricated

Inconel Alloy Pipes Form:

• Round, Square, Rectangular, Hydraulic Etc.

Length:

• Single Random, Double Random & Cut Length

End:

• Plain End, Beveled End, Threaded

Features:

• Value Added Services
• Hot Dipped Galvanizing
• Epoxy & FBE Coating
• Electro Polish
• Draw & Expansion

Monel 400 is a nickel-copper alloy (about 67% Ni-23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000o F, and its melting point is 2370-2460o F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength

Features :

• Resistant to seawater and steam at high temperatures
• Excellent resistance to rapidly flowing brackish water or seawater
• Excellent resistance to stress corrosion cracking in most freshwaters
• Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
• Excellent resistance to neutral and alkaline salt
• Resistance to chloride induced stress corrosion cracking
• Good mechanical properties from sub-zero temperatures up to 1020o F
• High resistance to alkalis

We offer a comprehensive range of high quality Nickel 201 Fittings to our esteemed clients. These fittings are widely acknowledged for high performance, durability and corrosion resistance. Available in standard specification of UNS N02200, N02201, these products are manufactured using top quality raw material which is sourced from the trusted and licensed vendors. In addition, we offer customize our products as per the diverse requirement of our clients.

Form : Elbow, Tee, Reducer, Pipe Nipple, Stubend, Bend, End Cap, Laterals,

TYPE : Seamless / Welded/ Fabricated.

Standard : UNS N02200, N02201.

Test Certificate : As Per EN10204/3.1B Manufacturer Test Certificate.

Bolts : Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolts, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts , T- Head Bolts , Wing Screw , Eye Bolt , Eye Bolt, Foundation Bolts, Structural Bolts.

Washers : Plain Washer , Plain Big & Small Od Washer , Spring Lock Washer , Spring Washer Heavy Duty , Tooth Washer , Star Washer , Tab Washer With One & Two Tab.

Nuts : Hexagon Nuts , Hexagon Coupling Nuts , Hexagon Thin Nut , Square Nut , Hexagon Castle Nuts , Self Locking Nut , Hexagon Domed Cap Nuts.

Screws : Pan Head Slotted Screws , Cheese Head Slotted Screws , Countersunk Head Slotted Screws , Countersunk Raised Head Slotted Screws , Pan Phillipse Head Screw , Countersunk Phillipse Raised Head Screws , Slotted Cheese Trim Head Machine Screws , Socket Head Allen Cap Screws , Allen Countersunk Socket Head Cap Screws , Socket Head Shoulder Screws , Socket Head Cap Screw Low Head , Hexagon Socket Set Screw With Flat Point , Hexagon Socket Set Scews With Cone Point , Hexagon Socket Set Screw With Dog Point , Hexagon Socket Set Screws With Dog Point , Hexagon Socket Set Screws With Cup Point , Imprial Socket Cap Screws .

Nichrome wire is commonly used as a resistance heater for cutting foam (Styrofoam, polyurethane, etc.) fabrics, and a variety of other materials.

We stock 16-22, 24, 25, 28, 29 and 31 gauge Nichrome-60 wire sold by the foot (packaged in a plastic bag) - A commonly used wire is 21 gauge. It might require some experimentation to determine the best gauge to use for your material.

Nichrome-60 Wire

• NiCr60 Type Alloy 675 Nickel Chrome Alloy
• Nickel: 57-58%
• Chromium: 16%
• Silicon: 1.5%
• Iron: Balance

Properties of NiCr 60 Type 675 Alloy:

• Density (Weight Per Cubic Inch:) 0.2979 lbs
• Specific Gravity @ 68°F (20°C): 8.247
• Magnetic Attraction: Para
• Thermal Conductivity Watts/cm/°C @ 100°C (212°F): 0.132
• Approximate Melting Point: 2462°F (1350°C)
• Maximum Operating Temperature: 1652°F (900°C)

Resistivity Factor:

• Temperature 68°F (20°C), Factor 1.000
• Temperature 212°F (100°C), Factor 1.019
• Temperature 392°F (200°C), Factor 1.043
• Temperature 572°F (300°C), Factor 1.065
• Temperature 752°F (400°C), Factor 1.085
• Temperature 932°F (500°C), Factor 1.093
• Temperature 1112°F (600°C), Factor 1.110
• Temperature 1292°F (700°C), Factor 1.114
• Temperature 1472°F (800°C), Factor 1.123
• Temperature 1652°F (900°C), Factor 1.132
• Temperature 1832°F (1000°C), Factor 1.143